|
|
Businesses running entry-level HPC and front-end applications in high-density environments face the challenge of securing high performance, availability, and scalability on a limited budget. Intel addresses the needs of such businesses with the Intel® Server Board SE7320VP2 and Intel® Server Platform SR1435VP2.
Key Features
- Intel® Server Board SE7320VP2
- SSE-compliant front panel with hard-drive, network-activity, and system-fault LEDs
- Three hard-drive bays
- Slimline DVD, CD, or floppy bay
- Bracket to support two riser cards: one full-height and one low-profile
- 450W PFC power supply
- Five system fans and two power-supply fans for cooling
- Baffle for optimized core-zone cooling
| Chassis Specifications |
| Form Factor |
| Height |
1U |
| Maximum motherboard size / form factor |
SSI Thin E-Bay v3.0 |
| Dimensions |
| Height |
1.7” (43mm) |
| Width |
16.9" (430mm) |
| Depth |
26.5" (27.2" with handles) (672mm) |
| Gross Weight |
|
| Available Colors |
Black Bezel |
| Expansion Slots |
| Available Expansion Slots |
Four independent PCI buses enabling integrated video, integrated network controllers, and two riser card slots; the first riser slot is an Intel® Adaptive Slot supporting PCI Express* x4 and PCI-X 66MHz, and the second riser slot supports PCI-X 66MHz |
| Drive Bays |
| |
Standard 3 x 3.5” |
| SCSI Backplane |
| Description |
N/A |
| Peripheral Drives |
| Floppy |
1.44 MB and 2.88 MB, 3-mode support |
| CD-ROM |
Yes |
| System Cooling |
| Fans |
Seven fans (five for the system and two for the power supply) to provide cooling for processors, hard drives, power supply, and add-in cards monitored by Intel® Server Management 8 |
| Operating Environment (System) |
| Operating Temperature Range |
Operating (system): 10°C to 35°C; |
| Non-Operating Temperature Range |
non-operating/storage (system): –40°C to +70°C ambient |
| Humidity Range |
Non-operating 95%, non-condensing at 30°C |
| Non-Operating Humidity Range |
| Power Supply |
| Description |
450W PFC |
| AC Voltage |
|
| DC Output |
|
| +5V |
5.9A maximum continuous current |
| +5V standby |
2A minimum continuous current |
| +12V |
22A maximum continuous current |
| -12V |
0.5A maximum continuous current |
| +3.3V |
4A maximum continuous current |
| Regulatory (Power Supply) |
| Power Supply Safety / EMC |
(EMC Regulatory Compliance is based on a board configured in an Intel host system in which Intel tested the board and found it compliant.) |
| Front Panel |
| Buttons |
|
| LEDs |
Power LED, hard-drive activity LED, system-fault LED, power/sleep switch, server network connection 1 LED, server network connection 2 LED, reset switch, NMI switch |
| Ports |
Two USB headers (back) and one internal front-panel USB header for two additional USB ports |
|
| Motherboard Specifications |
| Part Numbers |
| Part Number |
Description |
| SE7320VP2 |
Intel® Server Board SE7320VP2 (supporting DDR 266/333) |
| SE7320VP2D2 |
Intel® Server Board SE7320VP2 (supporting DDR2 400) |
| Physical Specifications |
| Form Factor |
SSI Thin E-Bay v1.1 |
| Dimensions |
13" x 12" (330 mm x 305 mm) |
| Processor Information |
| CPU Socket |
FC-mPGA |
| Supported CPUs |
One or two Intel® Xeon® processor(s) |
| Thermal Solutions Supported |
Passive |
| System Bus Speed |
800MHz system bus. |
| System Memory |
| Number of DIMM Sockets |
6 |
| Total Memory Supported |
Six DIMM sockets for up to 24 GB of Registered ECC DDR 266/333 |
| Minimum number of DIMMs |
2 |
| Dual Channel Support |
Yes |
| Memory Type |
Registered ECC DDR 266/333 SDRAM 72-bit, 184-pin gold-plated DIMMs |
| DIMM Sizes Supported |
256MB, 512MB, 1GB, 2GB, 4GB |
| Memory Voltage |
2.5V |
| Memory Reliability |
|
| |
Error Detection |
ECC |
| |
Memory Sparing |
Yes |
| |
Memory Mirroring |
Yes |
| |
Hot Swap Memory |
No |
| On-Board Devices |
| Chipset |
Intel® E7320 Chipset |
| SATA |
|
| |
Controller |
ESB |
| |
Number of Drives |
2 |
| |
Number of Ports |
2 |
| |
RAID Support |
RAID 0 and 1 |
| SAS |
|
| |
Controller |
n/a |
| |
Number of Drives |
n/a |
| |
Number of Ports |
n/a |
| |
RAID Support |
n/a |
| SCSI |
|
| |
Controller |
n/a |
| |
RAID Support |
n/a |
| IDE |
|
| |
Number of IDE Devices Supported |
4 |
| |
IDE Modes Supported |
ATA33/66/100 |
| Floppy Controller |
1.44 MB and 2.88 MB, 3-mode support |
| Network Adaptor |
|
| |
Controller |
One Intel PRO/1000 MT Server Network Connection, one Marvell* 88E8050 Network Interface Controller. |
| |
Speeds |
10BASE-T, 100BASE-TX, and 1000BASE-T |
| |
Number of Ports |
2 |
| Graphics |
ATI* RAGE* XL SVGA PCI video controller with 8 MB of video memory |
| Super I/O |
National Semiconductor* PC87417 |
| Clock Generator |
ATI Rage XL |
| LED Diagnostics |
POST LED |
| Input / Output |
| External USB Ports |
2 |
| Internal USB Connections |
1 support up to 2 ports |
| USB Standards Supported |
1.1 / 2.0 |
| VGA |
yes |
| Keyboard / Mouse |
Two PS/2 ports, 8240A compatible |
| Serial Ports |
One asynchronous RJ45 Serial B port with DH10 10-pin internal serial A header. |
| Parallel Port |
n/a |
| Supported Chassis |
| Rack |
|
| |
1U |
Intel® Server Chassis SR1435 |
| |
2U |
|
| |
Small Depth |
n/a |
| |
Pedestal Conversion |
n/a |
| Pedestal |
n/a |
| Expansion Slots |
| PCI-Express |
Two riser card slots; the first riser slot is an Intel® Adaptive Slot supporting PCI Express* x4 and PCI-X 66MHz, and the second riser slot supports PCI-X 66MHz. |
| PCI-X |
| PCI |
| Adaptive |
| System BIOS |
| BIOS Type |
AMI* |
| BIOS Features |
|
| |
Rolling BIOS |
Yes |
| |
SMBIOS |
SMBIOS 2.3 |
| |
PnP |
Yes |
| |
APM |
|
| |
DMI |
|
| |
PCI |
|
| |
ACPI |
Yes |
| |
Other Features |
|
| Management |
| Supported Standards |
IPMI, DMI, CIM, SNMP, ICMB |
| Software |
Intel® Server Manager 8 family of software; upgradeable to support HP Unicenter*, Tivoli*, and LANDesk* Management Suite 8. |
| Hardware Module Support |
Intel® Management Module Professional Edition, Advanced Edition |
| Power Configurations |
ACPI |
| PC Health Monitoring |
| CPU |
Via BIOS or ISM |
| FAN |
Via BIOS or ISM |
| Temperature |
Via BIOS or ISM |
| Intrusion Detection |
Via BIOS or ISM |
|
|
 |
